 |
D6714
| Lock Number / Cylinder
Mechanism |
| 14 or 17 Tumbler |
8 Tumbler |
Locking Style |
A |
B |
| LD6714 |
LD5714 |
Spring Bolt |
1-17/64 |
29/32 |
| LD6713 |
LD5713 |
Dead Bolt |
| LD6714-60 |
LD5714-60 |
S.S. Spring Bolt |
1-17/64 |
29/32 |
| LD6713-20 |
LD5713-20 |
S.S. Dead Bolt |
| LD6714H * |
|
S.S. Spring Bolt |
1-25/64 |
1-1/32 |
| LD6713H * |
|
S.S. Dead Bolt |
* = UL Recognized, not available
on 17 tumbler version.
Specifications: Pop-out handle cylinder lock engineering
with security in mind used in vending machines. Available with
the standard spring bolt style or with our Patented spring loaded
dead bolt style where it functions as a dead bolt in the locked
position, but is spring loaded in the unlocked positions.
Material: Zinc die cast housing and cylinder with
hardened stainless steel guides. Zinc die cast bolt is standard,
Stainless steel bolt is optional.
Mechanism: Available in triple bitted 14 or 17
tumbler Duo type "M" mechanism with optional registered
keying system. Lock uses two internal body lugs which resist
pulling, and hardened stainless steel head and body guides to
resist drilling. On the UL recognized version, the lock mechanism
is enhanced by even thicker body lugs for better pull resistance
as well as a stainless steel drill plate in the back of the lock
preventing access through the lock to the bolt. This version
does utilize the stainless steel bolt as standard.
Operation: 125° key turn. Key withdraws in
locked position only.
Finish: Bright chrome is standard other
finishes available upon request.
back
to pop-out handle cylinder page
|