Illinois Lock Company utilizes Kraus & Naimer switches
for a wide variety of high amp switch locks

• Snap on design for easy installation
• UL, CSA, and VDE approvals
• Various switch ratings
• Multiple poles
• Easy access terminals for servicing
• Terminals accept two 14 GA stranded wires each
• Custom contact and terminal configurations
• Momentary, double momentary or combined maintaining momentary
• Part number LD3171N-K is UL tested with a NEMA design for weather resistance
• High amp switch locks are in stock

1. Approved under "component program".
(UL-recognized industrial component) File No. E35541, Guide No. NLRV2
2. Approved under the "listing program". File No. E35531, guide No. NLRV
3. File No. 13002, Class No. 321105 Resp. 465204
4. Industrial Switchgear is not required to bear a symbol, but must conform to requirements.
5. IEC does not operate an approval scheme

CA4 and CA4-1 Switches
- Rated 10 Amps@ 300V AC (UL)
- 48 V 16A, 60V/2.5A, 110V/.7A
- 10 Amps @ 24 VDC
- CA4 has 3 microns gold on contacts
- CA4-1 has 30 microns gold on contacts for harsh environments or high reliability
- Terminals accept two (2) 14 GA stranded wires each

CG6 Switches
- Rated 10 Amps@ 300V AC (UL)
- 16 Amps @ 150V AC (UL)
- 20 Amps @150V AC (UL)
- 20 Amps @ 24 VDC; 12 Amps @ 48 VDC; 4.5 Amps @ 60 VDC; 1 Amp @ 110 VDC
- Features easy access terminals for servicing
- Terminals accept two (2) 14 GA stranded wires each

CG7 Switches
- Rated 16 Amps @ 600V AC
- 20 Amps @ 600V AC (UL)
- 20 Amps @ 24 VDC; 12 Amps @ 48 VDC; 4.5 Amps @ 60 VDC; 1 Amp @ 110 VDC
- Features easy access terminals for servicing
- Terminals accept two (2) 14 GA stranded wires each

(Circle = Switch approved - Triangle = switch conforms to requirements)